Modern Living

Modern Living

Home and real estate topics discussed in detail

3 Reasons You Should Use Plastic Injection Molding

September 30, 2021 | Comment

If you run a business, you understand that the bottom line is everything. The more money you can save, the better off your business will be. However, you don’t want the quality of your product to suffer because you chose to go the cheapest way possible.

Whether your company makes headphones, car parts, or medical equipment, you need to make enough products to meet your demands, all while keeping your costs as low as possible and providing high-quality goods to the customer. With plastic injection molding services, you can have your parts delivered to you in a fraction of the time they would be if they were made in other ways. Here are some reasons that plastic injection molding could be right for your business

1. Save Costs

The molding process is mainly automated and usually requires just one or two technicians to control the robots. Because of this, you can save a tremendous amount of money on labor costs. A machine can make thousands of pieces in the time that a handful of employees could make only a few hundred.

Another major benefit to plastic injection molding machines is that they reduce the amount of waste you have when molds are made. Because the systems used computer-aided design software, the molds can be made much closer together without the fear of damaging them.

2. Higher Detail

With some molding processes, products can’t be too detailed because they don’t release from the molds easily. Additionally, the details in the molds often don’t come across well and can negatively affect the final process. That, however, is not a problem for plastic injection molds.

The molds are filled using extremely high pressure, allowing for more complex and intricate designs. This high-pressure method is helpful if you have a product with a lot of detail and you don’t want the end result to suffer.

3. Stronger Product

If one of your hesitancies about using plastic injection molding is that the products won’t be strong enough, you can rest assured knowing that won’t be an issue. You can mix special fillers made of glass, talc or carbon, into the injection molds, which helps increase the product’s strength. The amount of filler used will help determine how strong the final product is.

On the flip side, if you have a product that needs to be softer than your regular plastic, you can add plasticizers to your material. The plasticizers reduce the viscosity of the material and lower its rigidity.

Leave a Reply

Your email address will not be published. Required fields are marked *